Platinum Roofing — licensed & insured roofing in Alpharetta, GA
Call (770) 419-5714
Platinum Roofing technician installing a white TPO membrane on a low-slope commercial roof in metro Atlanta

Commercial & Flat Roofing in Atlanta and North Georgia

Platinum Roofing installs, restores, and maintains low-slope and flat commercial roofs for businesses throughout Atlanta and North Georgia. As a MasterCraftsman-certified liquid-applied applicator, we offer single-ply membranes, modified bitumen, and seamless coating systems engineered for the ponding, heat, and UV exposure that flat roofs face in the Southeast. Our focus is keeping your building dry and your operations running with minimal disruption.

Commercial Roofing Systems We Install

Most commercial buildings in metro Atlanta, including retail strips, warehouses, medical offices, and restaurants, sit under low-slope or flat roofs that demand fundamentally different systems than residential shingles. We install TPO and EPDM single-ply membranes, multi-ply modified bitumen, and fluid-applied membrane systems, selecting the assembly based on your building’s slope, deck type, foot traffic, and rooftop equipment.

TPO is the dominant choice for North Georgia commercial work: its white reflective surface lowers cooling loads through our long, hot summers, and its heat-welded seams create a monolithic, watertight surface. EPDM rubber excels in durability and weathering for buildings with less rooftop traffic, while modified bitumen offers a tough, redundant multi-layer membrane well suited to roofs with heavy mechanical traffic or complex flashing details.

MasterCraftsman Liquid-Applied Membranes

Our MasterCraftsman Liquid-Applied certification sets us apart for the most demanding flat-roof challenges. Liquid-applied membranes are fluid coatings that cure into a fully adhered, seamless waterproofing layer with no seams, laps, or fasteners to fail. Because they are applied as a continuous film, they conform perfectly around drains, curbs, penetrations, and irregular details that are difficult to flash with sheet goods.

These systems are ideal for restoring aging roofs, waterproofing complex rooftop geometries, and protecting structures where a single seam failure would be costly. The certification reflects manufacturer-verified training in surface preparation, mil-thickness control, and detail work, which is what separates a coating that lasts decades from one that fails early. For many North Georgia building owners, a liquid-applied restoration is the most cost-effective path to a watertight roof.

Restoration Versus Full Replacement

Not every aging commercial roof needs to be torn off. If the underlying deck and insulation are dry and structurally sound, a restoration with a reflective coating or liquid-applied membrane can add 10 to 20 years of service life at a fraction of replacement cost, often without disposal fees or tear-off disruption. We core-test and moisture-scan the roof to determine whether the substrate can support restoration.

When membranes are saturated, the insulation is wet, or the deck is compromised, a full replacement is the responsible choice, and we re-roof with a new system matched to your building. We give building owners an honest, documented assessment of both options with projected lifespan and cost, so the decision is driven by the roof’s actual condition rather than a one-size-fits-all sales pitch.

Preventative Maintenance Programs

A commercial roof is a major capital asset, and small problems left unaddressed become expensive interior damage. Our preventative maintenance programs include scheduled inspections, clearing of drains and scuppers, resealing of penetrations and flashings, and documented condition reports you can use for budgeting and warranty compliance. Most single-ply manufacturer warranties actually require periodic maintenance to stay valid.

We inspect after major storms and on a regular cadence, catching split seams, open laps, and blocked drainage before they let water into the building. For multi-property owners and property managers across North Atlanta, this turns roofing from an unpredictable emergency expense into a planned, manageable line item.

Minimizing Disruption to Your Business

We understand that a roof project cannot shut down your business. Platinum Roofing schedules commercial work around your operating hours, stages materials to keep entrances and parking clear, and contains odor and debris to protect occupants, inventory, and customers below. Founded in 2000 and based in Alpharetta, we coordinate directly with facility managers and tenants so the work is predictable and the building stays open.

Our Process

The Commercial Roofing Process

  1. 1

    Roof Survey & Moisture Scan

    We measure the roof, core-test the substrate, and scan for trapped moisture to determine whether restoration or replacement is warranted.

  2. 2

    System Recommendation

    You receive a documented comparison of options, projected lifespan, and cost so you can choose between restoration and full re-roof.

  3. 3

    Surface Prep & Detailing

    We clean the deck, repair seams and penetrations, and prime or prepare the surface to manufacturer specification before membrane work.

  4. 4

    Membrane or Coating Application

    We install single-ply, modified bitumen, or apply a controlled-thickness liquid-applied membrane around all curbs and drains.

  5. 5

    Quality Check & Maintenance Plan

    We verify seams and mil thickness, document the finished roof, and enroll you in a maintenance schedule to protect the warranty.

Platinum restored the TPO roof on our Marietta warehouse instead of pushing a full tear-off, which saved us a substantial amount. They worked around our shipping schedule, sealed up every drain and HVAC curb, and set us up on a maintenance plan. No leaks through two storm seasons since.
Daniel R.Commercial roof restoration, Marietta

Questions

Commercial Roofing FAQs

How do I choose between TPO, EPDM, and modified bitumen for my building?

The right membrane depends on your roof slope, rooftop traffic, equipment, and energy goals. TPO’s reflective white surface suits buildings wanting lower cooling costs, EPDM is favored for durability on low-traffic roofs, and modified bitumen provides redundant protection where heavy foot traffic or complex flashing exists. We assess all three factors on-site before recommending a system.

What is a liquid-applied roof restoration and when does it make sense?

A liquid-applied restoration is a seamless fluid membrane rolled or sprayed over a sound existing roof to renew its waterproofing without a tear-off. It makes sense when the deck and insulation are dry and the membrane is weathered but not failed, extending service life 10 to 20 years. As MasterCraftsman-certified applicators, we verify the substrate is suitable before recommending it.

Why does my flat roof hold standing water, and is ponding a problem?

Ponding water on low-slope roofs usually comes from inadequate slope, deflected decking, or clogged drains and scuppers. Standing water accelerates membrane breakdown, adds structural load, and voids many manufacturer warranties if left longer than 48 hours. We correct drainage with tapered insulation, drain repairs, and detailing during restoration or replacement.

Will replacing my commercial roof require closing my business?

In almost all cases, no. We schedule work around your operating hours, stage materials to keep entrances and parking accessible, and contain odors and debris so occupants and customers below are unaffected. We coordinate directly with your facility manager to phase the work and keep the building open throughout.

Do single-ply membrane warranties require ongoing maintenance?

Yes. Most manufacturer single-ply warranties require documented periodic inspections and maintenance to remain valid, and neglecting them is a common reason claims are denied. Our preventative maintenance program provides the scheduled inspections, drain clearing, and condition documentation needed to keep your warranty in force.

Can you waterproof around rooftop HVAC units, drains, and other penetrations?

Yes, and penetrations are where most commercial leaks begin. We flash and seal HVAC curbs, pipe penetrations, drains, scuppers, and parapet walls with detailed membrane work, and our liquid-applied systems are especially effective at sealing the irregular geometry around clustered rooftop equipment. Proper detailing here is what keeps the field of the roof dry.

Ready for Commercial Roofing?

Get a free, no-obligation commercial roofing estimate from North Georgia's 4th-generation roofers.